Pro-7B Head - Profoto Digital Camera Battery Pro-7 User Manual

Pro-7b head

The Pro-7b head is a small and easily transportable flash
head exclusively designed for the Pro-7b generator. Please
note that when changing modelling light, flash tube or glass
cover the lamp cable must be disconnected from the genera-
tor. The modelling light is a standard 100W lamp with an
E11 socket. The flash tube has two pins. When removing a
flash tube, pull it straight out of the sockets. When inserting
a new flash tube, check that the trigger-wire clasps properly
around the flash tube (please see mounting instructions in
package). The head has no fan. Because of the heat generat-
ed there is a certain limitation to the number of flashes per
minute. At the back of the head there is an opening for
attaching accessories like filters and barn doors.
10.15.28 Flash Tube, uncoated
10.20.14 Modelling light 100 W, 120 V, E11 socket
ProHead cont.
10.15.28 Flash Tube, uncoated
10.20.02 Modelling Light 250 W, 120 V, Mini-can socket (E11)
10.07.09 Handle for Pro-7 head, Pro-7b head and Pro-7 twin
9