Table of Contents
Advertisement
LCD Control
4-14
Primary IGFX Boot Display [VBIOS Default]
This option allows you to select the Video Device which will be activated
during POST. This has no effect if external graphics present. Secondary
boot display selection will appear based on your selection. VGA modes ill
be supported only on primary display.
Configuration options: [VBIOS Default] [CRT] [EFP] [LFP] [EFP3] {EFP2}
[LFP2]
LCD Panel Type [VBIOS Default]
This option allows you to select LCD panel used by Internal Graphics
Device by selecting the appropriate setup item.
Configuration options: [VBIOS Default] [640x480 LVDS] [800x600 LVDS]
[1024x768 LVDS] [1280x1024 LVDS] [1400x1050 LVDS1]
[1400x1050 LVDS2] [1600x1200 LVDS] [1280x768 LVDS]
[1680x1050 LVDS] [1920x1200 LVDS] [1600x900 LVDS] [1280x800 LVDS]
[1280x600 LVDS] [2048x1536 LVDS] [1366x768 LVDS]
Panel Scaling [Auto]
This option allows you to select the LCD panel scaling option used by the
Internal Graphics Device.
Configuration options: [Auto] [Off] [Force Scaling]
Backlight Control [PWM Normal]
Configuration options: [PWM Inverted] [PWm Normal]
BIA [Auto]
Configuration options: [Auto] [Disabled] [Level 1] [Level 2] [Level 3] [Level 4]
[Level 5]
Spread Spectrum clock Chip [Off]
[Off]
Spread is disabled
[Hardware] Spread is controlled by chip
[Software] Spread is controlled by BIOS
Active LFP [eDP Port-A]
This option allows you to configure the LFP usage.
Configuration options: [No LVDS] [eDP Port-A] [eDP Port-D]
Panel Color Depth [18 Bit]
This option allows you to select the LFP Panel Color Depth.
Configuration options: [18 Bit] [24 Bit]
Chapter 4: BIOS Setup
Advertisement
Table of Contents
