Radio Shack 22-1699 Owner's Manual page 21

For radar signal detection, if the signal strength nember
goes higher than 1, the voice alert says. "X-band dete-
cted", "K-band detected", or "KA-band detected" respec-
tively.
When your detector senses the laser signal, "PRO
LASER", "PRO LASER3", "LTI-2020 LASER" or
"ULTRALYTE LASER" scrolls and voice alert says,
" Laser detected".
When VG-2 is detected, "VG-2" flashes and the voice alert
says, "VG-2 detected".
When your detector senses a SWS signal, a message
appears depending on which SWS signal is detected, an
alert tone sounds for the type of signal detected, and the
voice alert announces the message.
21