Fuses - Kia Picanto 2016 Owner's Manual

Maintenance

FUSES

Blade type
B B B B l l l l
Cartridge type
Multi fuse
B B l l
B B l l
7 54
A vehicle's electrical system is protected
from electrical overload damage by fuses.
This vehicle has 2 fuse panels, one locat-
ed in the driver's side panel bolster, oth-
ers in the engine compartment near the
o o o o w w w w n n n n
battery.
If any of your vehicle's lights, acces-
sories, or controls do not work, check the
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will be
melted.
B B B B l l l l o o o o w w w w n n n n
If the electrical system does not work,
first check the driver's side fuse panel.
Always replace a blown fuse with one of
the same rating.
Before replacing a blown fuse, move to
safe place, turn off the engine and all
electric devices, and disconnect the neg-
ative battery cable.
o o w w n n
o o w w n n
If the replacement fuse blows, this indi-
cates an electrical problem. Avoid using
the system involved and we recommend
that you consult an authorized Kia dealer.
Four kinds of fuses are used: blade type
OTA070039
for lower amperage rating, cartridge type,
battery fuse terminal and multi fuse type
for higher amperage ratings.
WARNING
- Fuse
replacement
• Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a fire.
• Never install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage
and a possible fire.
• Do not arbitrarily modify or add-on
electric wiring of the vehicle.
CAUTION
Do not use a screwdriver or any
other metal object to remove fuses
because it may cause a short circuit
and damage the system.
✽ ✽ NOTICE
The actual fuse/relay panel label may
differ from equipped items.