JVC KD-G326 Instructions Manual
JVC KD-G326 Instructions Manual

JVC KD-G326 Instructions Manual

Cd receiver
Hide thumbs Also See for KD-G326:

Advertisement

Available languages

Available languages

CD RECEIVER
ALAT PENERIMA CD
For canceling the display demonstration, see page 5.
Untuk membatalkan tampilan demonstrasi, lihat halaman 5.
For installation and connections, refer to the separate manual.
Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
INSTRUCTIONS
BUKU PETUNJUK
KD-G326/KD-G325
KD-G326/KD-G325
KD-G326
KD-G325
GET0342-004A
[UN]

Advertisement

Table of Contents
loading

Summary of Contents for JVC KD-G326

  • Page 1 CD RECEIVER KD-G326/KD-G325 ALAT PENERIMA CD KD-G326/KD-G325 KD-G326 KD-G325 For canceling the display demonstration, see page 5. Untuk membatalkan tampilan demonstrasi, lihat halaman 5. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
  • Page 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
  • Page 3 Control panel — ..4 • is used to indicate an indicator is KD-G326 and KD-G325 displayed for the correspnding operation. Getting started ......... 5 • Some related tips and notes are explained in Basic operations ............ 5 “More about this unit”...
  • Page 4 Control panel — KD-G326 and KD-G325 Parts identification Display window u RND (random) button (standby/on/attenuator) button 2 SOURCE button i M MODE button 3 BAND button (control panel release) button 4 Remote sensor • You can control this unit with an Display window optionally purchased remote controller.
  • Page 5: Getting Started

    Getting started Basic settings • See also “General settings — PSM” on pages Basic operations 10 and 11. Turn on the power. Ÿ * You cannot select “DISC” as the 1 Canceling the display playback source if there is no disc in the unit.
  • Page 6 Reception improves, but stereo effect will be Radio operations lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Ÿ Storing stations in memory You can preset six stations for each band. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
  • Page 7 To go to the next or previous folders (only for MP3 or WMA discs) Preset number flashes for a while. To locate a particular track (for CD) or folder Listening to a preset station (for MP3 or WMA discs) directly To select a number from 01 –...
  • Page 8: Changing The Display Information

    Changing the display information Selecting the playback modes You can use only one of the following playback modes at a time. While playing an audio CD or a CD Text Select your desired playback mode. 7 Repeat play While playing an MP3 or a WMA disc •...
  • Page 9: Sound Adjustments

    Sound adjustments Adjusting the sound You can adjust the sound characteristics to your You can select a preset sound mode suitable to preference. the music genre (C-EQ: custom equalizer). Displayed only when “L/O MODE” is set to “WOOFER” (see page 11). Ex.: When “ROCK”...
  • Page 10 General settings — PSM You can change PSM (Preferred Setting Mode) Adjust the PSM item selected. items listed in the table that follows. Repeat steps to adjust other Select a PSM item. PSM items if necessary. Finish the procedure. Indications Selectable settings, [reference page] DEMO DEMO ON : [Initial];...
  • Page 11 Indications Selectable settings, [reference page] WOOFER Frequencies lower than 55 Hz are sent to the subwoofer. Subwoofer cutoff [Initial]; Frequencies lower than 85 Hz are sent to the frequency subwoofer. HIGH Frequencies lower than 115 Hz are sent to the subwoofer. When connecting an amplifier or a subwoofer, set this correctly.
  • Page 12 Remote controller — Main elements and features RM-RK60 This unit can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller RM-RK60 with your unit. Installing the lithium coin battery (CR2025) (standby/on attenuator) button •...
  • Page 13 To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
  • Page 14: More About This Unit

    General More about this unit • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ Basic operations CD-RWs (Rewritable) in audio CD (CD-DA), MP3 and WMA formats. Turning on the power • When a disc has been loaded, selecting •...
  • Page 15 • Do not use the following CD-Rs or CD-RWs: • This unit can recognize a total of 512 files, of – Discs with stickers, labels, or protective seal 200 folders, and of 8 hierarchies. stuck to the surface. • This unit cannot play back the following files: –...
  • Page 16: Troubleshooting

    Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. •...
  • Page 17: Specifications

    Specifications AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Type: Compact disc player Front: 50 W per channel Signal Detection System: Non-contact optical Rear: 50 W per channel pickup (semiconductor laser) Continuous Power Output (RMS): Number of Channels: 2 channels (stereo) Front: 19 W per channel into 4 Ω, 40 Hz Frequency Response: 5 Hz to 20 000 Hz to 20 000 Hz at no more than 0.8%...
  • Page 18 Terima kasih telah membeli produk JVC. Harap membaca seluruh petunjuk dengan teliti sebelum mengoperasikan, untuk memastikan anda memahami secara keseluruhan dan mendapatkan performansi terbaik dari unit ini. PENTING UNTUK PRODUK-PRODUK LASER 1. PRODUK LASER KELAS 1 2. PERHATIAN: Jangan membuka penutup atas. Tidak ada bagian yang dapat diperbaiki oleh pengguna di dalam unit tersebut;...
  • Page 19 Panel kontrol — ..4 • digunakan untuk menunjukkan KD-G326 dan KD-G325 indikator yang ditampilkan untuk Memulai .......... 5 pengoperasian yang bersangkutan. Pengoperasian-pengoperasian dasar ....5 • Beberapa saran dan catatan yang berkaitan dijelaskan dalam “Lebih lagi tentang alat...
  • Page 20 Panel kontrol — KD-G326 dan KD-G325 Pengenalan bagian-bagian Jendela tampilan 1 Tombol u Tombol RND (acak) (standby/hidup/pelemah) 2 Tombol SOURCE i Tombol M MODE 3 Tombol BAND o Tombol (pelepas panel kontrol) 4 Sensor remote kontrol • Anda dapat mengendalikan unit ini...
  • Page 21 Memulai Pengaturan dasar • Lihat juga “Pengaturan-pengaturan umum Pengoperasian-pengoperasian — PSM” pada halaman 10 dan 11. dasar Menghidupkan power. Ÿ 1 Membatalkan tampilan * Anda tidak dapat memilih “DISC” demonstrasi-demonstrasi sebagai sumber putar ulang jika tidak Pilih “DEMO”, kemudian “DEMO OFF”. ada disk di dalam unit.
  • Page 22 Penerimaan membaik, tetapi efek stereo akan Pengoperasian– hilang. Untuk mengembalikan efek stereo, ulangi pengoperasian radio prosedur yang sama. “MONO OFF” muncul dan indikator MO padam. Menyimpan stasiun-stasiun dalam memori Ÿ Anda dapat preset (mengatur awal) enam stasiun untuk setiap jalur. Mempreset (Mengatur awal) secara Menyala ketika menerima sebuah siaran otomatis stasiun FM—SSM (Memori...
  • Page 23 Untuk pergi ke folder-folder berikut atau sebelumnya (hanya untuk disk-disk MP3 atau WMA) Nomor preset (pengaturan awal) berkedip-kedip sesaat. Mendengarkan sebuah preset Untuk menempatkan sebuah trek khusus (pengaturan awal) stasiun (untuk CD) atau folder (untuk disk-disk MP3 atau WMA) secara langsung Untuk memilih sebuah nomor dari 01 –...
  • Page 24 Mengganti tampilan informasi Memilih mode-mode putar ulang Anda dapat menggunakan hanya satu dari mode putar ulang berikut pada saat yang sama. Sementara memutar sebuah CD Audio atau sebuah CD Teks Pilih mode putar ulang yang anda inginkan. 7 Putar berulang Sementara memutar sebuah disk MP3 atau WMA Mode...
  • Page 25 Penyetelan suara-suara Menyetel Suara Anda dapat menyetel karakteristik-karakteristik Anda dapat memilih sebuah mode preset suara untuk kesukaan anda. (pengaturan awal) yang sesuai untuk jenis musik (C-EQ: kostum equalizer). Hanya ditampilkan apabila “L/O MODE” disetel ke “WOOFER” (lihat halaman 11). Contoh: Ketika “ROCK” telah dipilih Indikasi, [Cakupan] BAS* (bas), [–06 ke +06]...
  • Page 26 Pengaturan-pengaturan umum — PSM Anda dapat mengganti bagian PSM (Mode Menyetel bagian PSM yang sudah Pengaturan yang Disukai) yang telah terdaftar dipilih. dalam tabel berikut. Ulangi langkah untuk Pilih sebuah bagian PSM. menyetel bagian-bagian PSM lain jika diperlukan. Prosedur selesai. Indikasi-indikasi Pengaturan-pengaturan yang terpilih, [halaman referensi] DEMO...
  • Page 27 Indikasi-indikasi Pengaturan-pengaturan yang terpilih, [halaman referensi] WOOFER* : Frekuensi-frekuensi yang lebih rendah dari 55 Hz dikirim ke Batas frekuensi subwoofer. subwoofer : [Permulaan]; Frekuensi-frekuensi yang lebih rendah dari 85 Hz dikirim ke subwoofer. HIGH : Frekuensi-frekuensi yang lebih rendah dari 115 Hz dikirim ke subwoofer.
  • Page 28 Remote Kontrol — Elemen-elemen utama dan fitur-fitur RM-RK60 Unit ini dapat dikendalikan dari jauh sebagaimana yang diinstruksikan di sini (dengan remote kontrol opsional yang bisa Anda beli). Kami anjurkan agar Anda menggunakan remote kontrol RM-RK60 dengan unit Anda. Memasang baterai koin litium (CR2025) 1 Tombol (standby/hidup pelemah)
  • Page 29 Untuk menjaga disk-disk bersih Perawatan Sebuah disk yang kotor mungkin tidak dapat diputar secara benar. Bagaimana membersihkan konektor- Jika sebuah disk menjadi kotor, lap konektor dengan sebuah kain lembut dalam satu garis lurus dari tengah ke pinggir. Sering melepaskan akan memperburuk •...
  • Page 30 Umum Lebih lagi tentang alat • Alat penerima ini sudah didisain untuk memainkan CD-CD/CD-CD Teks, dan CD-R penerima ini (dapat direkam)/CD-RW (dapat ditulis ulang) dalam format CD audio (CD-Digital Audio), Pengoperasian-pengoperasian dasar MP3 dan WMA. • Ketika sebuah disk sudah dimasukkan, pilih Menghidupkan power “DISC”...
  • Page 31 • Jangan gunakan CD-R atau CD-RW berikut: • Alat penerima ini dapat mengenali total 512 – Disk-disk dengan stiker-stiker, label- file, 200 folder, dan 8 hirarki. label atau stiker segel perlindungan beda • Alat penerima ini tidak dapat memutar ulang permukaannya.
  • Page 32 Pemecahan Masalah Apa yang muncul dan menjadi masalah tidak selalu serius. Cek poin-poin berikut sebelum memanggil sebuah pusat layanan. Gejala-gejala Perbaikan-perbaikan/Sebab-sebab • Suara tidak dapat didengar dari • Sesuaikan volume ke level optimum. speaker-speaker. • Cek kabel-kabel dan penyambungan- penyambungan. •...
  • Page 33 Spesifikasi-spesifikasi SEKSI PENGUAT AUDIO SEKSI ALAT PEMUTAR CD Maksimum keluaran power: Tipe: Alat Pemutar CD kompak Depan: 50 W per saluran Sistem Pendeteksi Sinyal: Optik non kontak Belakang: 50 W per saluran terbuka (laser semikonduktor) Output Power Kontinu (RMS): Nomor dari saluran-saluran: 2 saluran (stereo) 19 W per saluran dalam 4 Ω, Depan:...
  • Page 34 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda EN, IN © 2005 Victor Company of Japan, Limited 1005DTSMDTJEIN...

This manual is also suitable for:

Kd-g325

Table of Contents