Serial Port Adapter - NEC Express5800 System Configuration Manual

SYSTEM CONFIGURATION GUIDE
NOTE:

Please refer to NEC Storage website for supported OS and device

For FC-SAN boot, please refer to "FC SAN Boot Configuration Guide"

For the cluster configuration, please refer to the ExpressCluster website

Fibre Channel (FC) link speed varies by cable type and length

Serial Port Adapter

Product Name / Description
Additional Serial Port Kit
Serial port Connector
NOTE:

Up to one serial port adapter can be installed.

If you need to install N8154-99 3.5-inch Rear HDD Cage or 3rd Riser Card, an additional serial port kit is not available.
ExpEther Board
It is connected to ExpEther I/O Expasion Unit(40G)
Product Name / Description
ExpEther Board
PCIe 3.0(x8), 2x40G QSFP+ board
NOTE:

Up to two ExpEther Board can be installed.

QSFP+ module is required.

It is supported to directly connect to ExpEther I/O Expansion Unit.

Please contact your sales representative for further information.
NEC Corporation
–
NEC Express5800/R120h-2M
- Please download the driver kit from Express5800 websiteweb site
- This controller must be installed after shipment.
Revision 5.0 – January 2018
Part Number
N8117-09
Part Number
N8117-09
31