Table of Contents
Advertisement
Intel® Optane™ Solid State Drive 760p and Pro 7600p Series
3
UEFI Configuration and Setup
Enabling the Compatibility Support
This is an example of how to configure the BIOS for CSM support in addition to configuring the boot options to
enable UEFI.
Consult your specific motherboard vendor's User Guide or support site for the proper settings
Example
ASUS* Prime Z270-A BIOS Configuration
Specifications
Motherboard
ASUS Prime Z270-A*
Chipset
Intel® Z270 Chipset
BIOS Revision
0906 (3/24/2017)
Compatibility Notes
UEFI is a requirement across all windows installations and CSM needs to be enabled for the Windows 7 operating
system.
Windows 8.1/10*
Boot options must be configured to UEFI.
Windows 7*
1.
Open CSM (Compatibility Support Module) under the Boot tab
2.
Verify that Launch CSM is Enabled
3.
Set Boot from Storage Devices and Boot from PCI-E/PCI Expansion Devices to UEFI driverfirst
Figure 1:
Required Configuration for Windows 7 Boot Support
January 2018
337025-001US
§
Installation Guide
7
Advertisement
Table of Contents
