Repair Hints - Sharp MX-4141N Technical Manual

SPECIFICATION
Model
Is it possible to Tandem
MX-4141/5141N series with another
ALL
Is it possible to retain the Destination
Address (Image Send Mode), once the
current Scan operation is complete?
TROUBLE CODES
MX-FNX9
MX-FN10
MX-FN11
MX-FN18
MX-PNX6
DOCUMENT FILING / PUBLIC FOLDER
Unable to browse the NAS/Public
Folder, even though the Public
Folder/NAS settings are enabled within
ALL
the Network Settings menu.
Can you use Domain User Accounts to
browse the NAS/Public Folders?
SHARP OSA
Unable to enter the URLs for EAM
(External Accounting Mode) as the item
ALL
is missing from the webpage, even
though MXAMX3 is enabled.
DATA SECURITY KIT
When printing to a specific folder
MX-FR42U without PIN, Error 421 occurs - only
SHARPDESK MOBILE
Which additional options are required
for full functionality when using
ALL
Sharpdesk Mobile via the wireless
Document Solution Centre
SHARP
Symptom
MX colour device?
F1-21
when DSK is installed.
access point?
Tandem operation is only supported with
MX-4141/5141N series only.
To enable this function, change,
SIM55-03 SW30-3 from 0 (default) to 1.
Once enabled, go to System Settings-Image Send Settings-
Operation Settings menu and enable the "Hold Address
for a while after scanning is completed" option for the
relevant Image Send mode.
To support MX-4141/5141N series, the Finisher/Punch
firmware must be updated to the following versions (or
MX-FNX9 V01.05.01; MX-FN10 v01.12.02;
MX-FN11/18 v01.06.02; MX-FN18 (Saddle) v01.01.03; MX-
PNX6 v01.02.02
The NBT/WINS Port (Security setting) must be enabled to
use NAS/Public storage. For security measures, this port
setting is disabled as default.
NAS/Public Folders support local accounts only
(programmed on MFP)
Check the setting for Sim 26-03 (Coin Vendor Mode).
Ensure OUTSIDE AUDITOR is configured to None.
To print to a specific folder without PIN, perform the
following setting changes:-
1. Settings - Security Settings - Other Settings -
Disabling of Document Filing menu:-
Un tick Sharing Mode for Printer.
2. User Control - Authority Group List - Add
Authority group Registration - Job Setting -
Security - Document Filing Approval Setting
menu:-
Enable Sharing Mode.

Repair Hints

Advice
higher):
None
55