Semiconductor Data - HYT TC-610 Service Manual

Hide thumbs Also See for TC-610:
Table of Contents

Advertisement

When the remote speaker microphone with VOX is inserted into the earpiece jack, Q201 cuts off.
MIC_EN switches from low level to high level and Q202 completes the circuit with R204 and the
external remote speaker microphone simultaneously. Q202 becomes conductive. EXT-PTT
switches from low level to high level, which is detected by MCU as insert of a remote speaker
microphone with VOX. The VOX function is enabled. When the VOX detect level (5 levels available)
meets the preset requirements, the radio transmits and the audio signal goes to the baseband
processing IC AN29160 through the processing path.
If a remote speaker microphone without VOX (remote speaker microphone with PTT) is inserted,
Q201 cuts off. MIC_EN switches from low level to high level but Q202 can not complete the circuit
and keep the cut-off status. EXT-PTT is of low level. MCU detects as the remote speaker
microphone without VOX and the radio returns to the common mode. Press the PTT key on the
remote speaker microphone to transmit.

Semiconductor Data

Pin
Pin Name
No.
1
AVcc
2
AVR
3
PE3/INT13
4
PE2/INT12
5
PE1/INT11
6
PE0/INT10
7
P83
8
P82
9
P81
10
P80
11
P71/TI0
12
P70/TO0
13
MOD
TC-610
TC-620
Vcc
Vcc
Vcc
Vcc
PTT
PTT
A_KEY
A_KEY
EXT-PTT
EXT-PTT
B_KEY
B_KEY
ENC3
ENC3
ENC2
ENC2
ENC1
ENC1
ENC0
ENC0
T/R
T/R
Reserve
Reserve
For down
For down
-loading
-loading
I/
Description
O
Power supply pin for A/D, connecting power
supply
A/D reference input pin, connecting power
supply
PTT key (connected with pull-up resistor ) (valid
I
at low level)
SK1, programmable function key (connected
I
with pull-up resistor ) (valid at low level)
PTT key on the earpiece (connected with
I
pull-down resistor) (valid at high level)
SK2, programmable function key (connected
I
with pull-up resistor ) (valid at low level)
I
Encoder input of channel selector
I
knob(connected with pull-up resistor )
I
I
O Tx-Rx switch control H(R)/L(T)
O Reserved
An operating mode designation pin. When
I
downloading, this pin is connected with Vcc and
a resistor of 47K is also connected between the
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc-620

Table of Contents