Draining Water From Air Starter Compressor - Mitsubishi S 12 R User And Maintenance Manual

Chapter 6
PERIODIC INSPECTION AND MAINTENANCE PROCEDURES

Draining Water from Air Starter Compressor

1 Check the starter valve handle of the air strainer
tank.
2 Remove the drain plug and drain water from the
air strainer compressor.
3 Install the drain plug after draining water.
4 Open the starter valve handle of the air starter
tank slowly.
Note: The air compressor model and shape differ
on the type of the engine.
6-16
fig.6-34 Air starter compressor
Drain plug