The power windows can be operated when
■
The engine switch is in the ON position.
Door lock linked power windows operation
■
The power windows can be opened and closed using the key. (→P. 37)
Operating the power windows after turning the engine switch off
■
The power windows can be operated for approximately 43 seconds even
after the engine switch is turned to the ACC position or turned off. They can-
not, however, be operated once either front door is opened.
Jam protection function (Front windows only)
■
If an object becomes caught between the window and the window frame,
window travel is stopped and the window is opened slightly.
When the power window does not close normally
■
If the jam protection function is operating abnormally and a window cannot
be closed, perform the following operations using the power window switch
on the front door.
After stopping the vehicle, the window can be closed by holding the
●
power window switch in the one-touch closing position while the engine
switch is turned to the ON position.
If the window still cannot be closed even by carrying out the operation
●
explained above, initialize the function by performing the following proce-
dure.
Hold the power window switch in the one-touch closing position.
Continue holding the switch for a further 6 seconds after the win-
dow has closed.
Hold the power window switch in the one-touch opening position.
Continue holding the switch for a further 2 seconds after the win-
dow has opened completely.
Hold the power window switch in the one-touch closing position
once again. Continue holding the switch for a further 2 seconds
after the window has closed.
If you release the switch while the window is moving, start again from the
beginning. If the window continues to close but then re-open slightly even
after performing the above procedure correctly, have the vehicle inspected
by your Toyota dealer.
1-4. Opening and closing the windows and moon roof
1
93