11.Remove the halogen lamp from the heat roller by
pulling it out to the arrow direction.
Halogen Lamp
5.2.9 Engine Shield (Including Main PBA and SMPS)
1.Before Disassembling
-Separate the font cover.(Refer to 5.2)
-Separate the SMPS cover.(Refer to 5.3)
-Separate the Main cover.(Refer to 5.4)
Samsung Electronics
Heat Roller
2.Disconnect all connectors except the connector
which connects the SMPS to the Main PBA.
Disassembly and Reassembly
Thermister
Clutch
Motor
LSU
HVPS
Fuser
Service Manual
5-11