Control Panel - Samsung ML-2571N Service Manual

4.2 Control Panel

4.2.1 OP Panel
4.2.2 Cancel button
LED
Printing demo page
Manual feeding
Canceling print job
Samsung Electronics
In Ready mode, press and hold this button for about 2 seconds until
all LEDs blink slowly, and release.
Press this button each time you load a sheet of paper in the
tray, when you select Manual Feed for Source from your software application.
Press this button during printing. The On Line/Error LED blinks while the
print job is cleared from both the printer and the computer, and then return to
Ready mode. This may take some time depending on the size of the print job.
In Manual Feed mode, you can't cancel the print job by pressing this button.
Description
Alignment and Adjustments
Service Manual
4-3