La Crosse Technology S84060 Instruction Manual page 20

1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw
1. Loosen the screw on side of vane
2. Remove direction vane
3. Install new vane
4. Tighten screw
1. Remove rain funnel (pull flat side firmly upward).
2. Gently remove debris or insects inside the rain sensor.
3. Clear debris from drain vents.
4. Clear debris from the rain funnel.
5. Reinstall the rain funnel.
Note: Do not oil the rain sensor.
Professional Remote Monitoring Station
Replace Wind Cups
Replace Directional Vane
Clean Rain Sensor
Page | 20