Symmetricom SSU-2000e User Manual page 230

Chapter 9 Hardware Configuration Guide
SSU-2000e Configuration Chart
Table 9-1. SSU-2000e System Components (Continued)
Item Description
7 Communications module
8 3-Port DS1 Input module
9 1-Port DS1 Input module
10 3-Port E1 Input module
11 1-Port E1 Input module
12 GPS Input module
13 Composite Clock Input
module
14 Input signal terminator
120Ω (DS1)
15 Input signal terminator
100Ω (E1)
16 Input signal terminator
75Ω (Coaxial cable)
17 E1 Output Module
18 DS1 Output Module
19 2048 kHz Output Module
230 SSU-2000e User's Guide
Part Number
Communications Module
23413012-000-0 One required per SSU-2000e system.
Input Modules
23413013-002-0 Accepts up to three DS1 or clock signals.
23413013-001-0 Accepts one DS1 or clock signal.
23413014-002-0 Any combination of three G.703/9,
G.703/13, or clock inputs.
23413014-001-0 Any G.703/9, G.703/13, or clock input.
23413019-000-0 One radio input signal
23413279-000-0 1. Accepts one Composite Clock signal
2. Requires Composite Clock Input
5511021-0038 As required
5511021-0039 As required
5511021-0041 As required
Output Modules
23413018-000-0 1. Minimum of 1 Output module required.
2. Each Output module provides 20
23413017-000-0 1. Minimum of 1 Output module required.
2. Each Output module provides 20
23413159-000-0 1. Installed in sets of two.
2. Each Output module pair provides 20
3. Maximum of 6 redundant output
4. Applications requiring more than 60
Notes
Adapter
single output signals or 20 redundant
signals (if desired) in even/odd slots.
single output signals or 20 redundant
signals (if desired) in adjacent slots.
sets of summed output signals
(redundant configuration).
modules can be installed in main shelf
(60 summed outputs).
output clocks require SDU-2000e
Expansion Shelf (see Table
12713140-002-2 Revision E – October 2006
9-2).