6. To install the new hard disk drive into the blue bracket, flex the bracket and
7. Insert the new hard disk drive into the drive bay far enough to connect the
8. Completely slide the new hard disk drive into the drive bay until the drive
9. Go to "Completing the parts replacement" on page 30.
Replacing the diskette drive
20
Hardware Replacement Guide
align the pins 1 through 4 on the bracket with the holes in the hard disk
drive. Do not touch the circuit board 5 on the bottom of the hard disk drive.
signal and power cables to the rear of the new hard disk drive.
locks into position.
Attention
Do not open your computer or attempt any repair before reading the "Important safety
information" in the Quick Reference that was included with your computer or in the
Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick
Reference or HMM, go to http://www.lenovo.com/think/support.