Table of Contents
Advertisement
Mode:
Use the " " / " " buttons to choose the timer
mode (Once/Daily/Weekly), and then press the
OK button.
4. Prepare your VCR for recording
When recording on a T-V LINK
compatible VCR:
1. Insert the videotape for recording into the
VCR and set the recording mode.
2. Make sure the VCR is ready to receive Di-
rect Rec commands from the TV.
3. Make sure VCR timer settings do not coin-
cide with the TV timer settings.
• For details, see your VCR instruction manual.
When recording on a T-V LINK
incompatible VCR:
1. Insert the videotape for recording into the
VCR and set the recording mode.
2. Set the VCR recording timer settings.
3. Make sure that the start and end time match
with the TV timer.
4. Set the VCR to record the signal from the
external input that the TV is connected to.
• For details, see your VCR instruction manual.
When you have finished the step 4, you have
set the timer.
When you are not watching TV, make sure the
TV is in stand by.
WARNING :
Do not turn off the main power. The timer func-
tion will not work with the main power switched
off.
The TV power lamp begins flashing before
the timer start time. When you are watching
TV at that time, a message appears on the
screen to inform you the timer is about to start.
• When performing timer recording with a T-V
LINK compatible device, test the timer re-
cording before you record the programme.
There are some T-V LINK compatible record-
ing device that will not correctly receive the
Direct Rec command from the TV.
• If the recording device does not operate when
the recording start time is reached, it means
VCR is not receiving the Direct Rec com-
mand from the TV. In this case, follow the
instructions of "When recording on a T-V LINK
incompatible VCR:".
While the timer is in operation:
• You can turn the TV on or off (Stand by).
WARNING: Do not turn off the main power.
• You can watch analogue terrestrial broad-
casting channels or the pictures via an Ext
terminal.
• Please note that any programme informa-
tion that appears on the screen, such as when
making changes to the Digital terrestrial
broadcasting (DVB-T) channel picture, will
be superimposed over the picture in the VCR
recording.
• When you press the following buttons ( ,
AV, MENU, SUBTITLE, GUIDE,
/
, number buttons) during re-
cording, a message appears asking if you
want to stop recording or not. Press OK
button to stop recording or BLUE button to
continue recording.
Cancelling the timer setting
Display the TIMER MENU and press the "
/ "
" buttons to choose which timer setting
to cancel. Press the " " / " " buttons so
that "Inactive" appears in the Mode column.
Reactivating the cancelled timer
setting
Display the TIMER MENU and press the "
/ "
" buttons to choose which timer setting
to reactivate. Press the " " / " " buttons so
that "Active" appears in the Mode column.
Configuration
Set the basic setting when watching Digital
terrestrial broadcasting (DVB-T).
Choose configuration and press the OK but-
ton.
CONFIGURATION appears.
- 19 -
, BACK,
"
"
Advertisement
Table of Contents
