Context Menu - Siemens SINUMERIK 840D sl Operating Manual

Introduction
1.4 Operator interface
See also
Entering or selecting parameters (Page 34)
1.4.9

Context menu

When you right-click, the context menu opens and provides the following functions:
● Cut
● Copy
● Paste
Program editor
Additional functions are available in the editor
● Undo the last change
● Redo the changes that were undone
Up to 10 changes can be undone.
1.4.10 Touch operation
If you have an operator panel with a touch screen, you can perform the following functions
with touch operation:
Operating area switchover
Channel switchover
38
Cut Ctrl+X
Copy Ctrl+C
Paste Ctrl+V
Undo Ctrl+Z
Redo Ctrl+Y
You can display the operating area menu by touching the display symbol for
the active operating area in the status display.
You can switch over to the next channel by touching the channel
display in the status display.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal