Table of Contents
Advertisement
Index
Introduction..........................................2
Including................................................3
NF-368 Diagram....................................4
Main Features..........................................5
L C D I n d i c a t i on ... ... ... ... ... ... ... ... ... ... ... 7
Preparation for Using..............................9
Operation Guide ....................................14
Functions Setting....................................15
Key Combination.......................................17
Menus................................................19
Menu
Description
Setting ...................................................20
Other Features and Setting...........................28
Maintenance..........................................31
Troubleshooting....................................32
and
Function
1
Introduction to NF-368
Thanks for purchasing NANFONE UHF FM
transceiver NF-368. Please read this manual
carefully to learn its functions and operations before
using.
With mini compact size, large LCD display, stable
performance, and easy-to-use feature, transceiver
NF-368 will be your best choice.
Including
Please take the radio out carefully from the package,
and check again before disposing of the packing to
make sure that all the following items are contained
in the packaging. If any of them are missing or
damaged during transportation, please contact with
the vendor for service.
2
Advertisement
Table of Contents
Related Manuals for Nanfone NF-368
Summary of Contents for Nanfone NF-368
- Page 1 Introduction to NF-368 Index Thanks for purchasing NANFONE UHF FM Introduction……………………………………2 transceiver NF-368. Please read this manual Including…………………………………………3 carefully to learn its functions and operations before NF-368 Diagram………………………………4 Main Features……………………………………5 using. L C D I n d i c a t i on … … … … … … … … … … … 7 With mini compact size, large LCD display, stable Preparation for Using…………………………9...
-
Page 2: Nf-368 Diagram
.NF-368 Diagram Accessories List: Description Unit Quantity Antenna Belt clip Hand strap Lithium battery pack Charger User Manual Earphone Warranty card 1. Battery snap; 2.Antenna; 3.Volume knob; 4.Coded selector; 5.PTT button; 6.Power supply jack; QC passed card 7.Indicator light; 8.Monitor/FM radio;... -
Page 3: Main Features
13.Dual-frequency standby .Main Features 14.CTCSS 1.Easy operation following menus with clear LCD 15.DCS display 16.Code 2.Battery: 3.7V 1200mAh rechargeable Lithium battery 17.Scan VFO scan/channel scan 3.Frequency: 400MHz 470MHz 18.Squelch level setting level 0-4 4.Wide/Narrow band selectable 25KHz/12.5KHz 19.Signal/power indicator table 5.TX output power High 2W,Low 0.5W 20.Background light ON/OFF 6.CTCSS 40 and DCS 82... -
Page 4: Lcd Indication
Menu 14 band setting using memory [MR] channel No. in call-out state Use menu 02 and CTCSS .Preparation Before Using Use menu 02 and Install belt clip overlay Activate another Install the belt clip overlay on the back of NF-368 function... - Page 5 Install rear case rechargeable battery case as following (Usually, it has been installed well in factory.). Install the battery rear case properly as following picture. Install Lithium battery pack Fix the rear case Put the original Lithium battery pack into the As picture, pull up the button in “lock”...
- Page 6 Install the belt clip Charge Install the belt clip as picture. The battery pack is without power when finished, and please charges it before using. When used for the first time after purchased or stored over two months, the capacity of battery pack is less than normal.
-
Page 7: Functions Setting
V. Operation Instruction Quickly press it to select VFO mode or channel mode, and hold it to memorize channels. Key functions: TX key. Hold this key to transmit and VI. Functions Setting release after transmission finished. POWER key Key for powering ON/OFF, Press [MODE] key to enter [01]DW dual transceiver will be turned on or turned off by pressing and frequency standby selecting. - Page 8 knob clockwise or withershins to enter [05] SQL [10]APO to set the automatically power off function. level setting. Press [MODE] key and then rotate the 6 Press [MODE] key and then rotate the “DIAL” “DIAL” knob clockwise or withershins to enter knob clockwise or withershins to enter [06] BCLO [11]TOT to set the TX time limit.
-
Page 9: Key Combination
LCD. Rotate the code selector clockwise to scan in VII. Functions of Key Combination ascending order, and rotate the code selector 1 [F]+[MODE] for keypad locked withershins to scan channels in descending order. To Press [F] key and the icon will be showed on stop scanning, please press [MR],[MODE]or [PTT] the bottom-left corner of LCD, and then press button to stop scanning (the channel will stay at... -
Page 10: Menus
VOX function VIII. Menu Description OFF, level 1-3 setting POWER (High/Low power HIGH--LOW setting Display & Description Setting Contents HLFDEV Wide/Narrow band OFF--ON selection Dual-frequency OFF--ON standby setting CODE Code setting OFF/CTCSS/DCS . Menu Function Description and CTCSS CTCSS setting 67Hz—254.1HZ DCS setting 023N---754N... - Page 11 2) Press [MODE] key again to enter the menu. 1) Press [MODE] key, and then tune [DIAL] knob to 3) Clockwise or counterclockwise rotate [DIAL] enter menu 03. And CTCSS displays. knob to select: OFF to turn off dual-frequency 2) Press [MODE] key again to enter the menu. standby, and ON to activate dual-frequency standby 3) Clockwise or counterclockwise rotate [DIAL] function.
- Page 12 steps below: to normal operating mode. 1) Press [MODE] key and then tune [DIAL] knob to LIGHT--Background Light enter menu 05. And SQL is showed. Selection 2) Press [MODE] key again to enter the menu. 1) Press [MODE] key and then tune [DIAL] knob to 3) Clockwise or counterclockwise rotate [DIAL] enter menu 07.
- Page 13 function: 4) Press [MODE] key again to confirm after 1) Press [MODE] key and then tune [DIAL] knob to selected. enter menu 08. And SAVE displays. 5) Press [PTT] key to save the new settings and exit 2) Press [MODE] key again to enter the menu. to normal operating mode.
- Page 14 4) Press [MODE] key again to confirm after 13. POWER -- Power Selection selected. Power of NF-368 can be set as high or low power 5) Press [PTT] key to save the new settings and exit according to actual using range and surrounding to to normal operating mode.
-
Page 15: Other Features And Setting
1. Channel memorization: 2. Emergency channel operations (emergency A) Conventional channels memorization, numbered calling function) from 01-99. NF-368 is built-in a very useful “emergency call" B) One special memorized channel (emergency feature. Hold the [F] key for over 1 second and the... - Page 16 "emergency call" function can be activated. At this radio mode. time: At FM radio state, walkie-talkie function retains A) The radio switch to the most commonly used priority always, which means FM radio function channel (OO-channel) to launch. exits automatically turns transceiver B) The red indicator light flashes.
-
Page 17: Maintenance
Maintenance Troubleshooting Transceiver NF-368 you purchased is an exactitude Trouble Solution design electronic products and please use it carefully. The battery pack has been exhausted. - Page 18 other members in frequency and CTCSS/DCS the same group. you use are the same as other members use in the same group. The distance between you and other group members may be too far. Please check if you are in the cover range of other group transceivers.