Removing And Mounting The Side Cover - NEC NC1000C Installation Manual

Before Setting Up Your Projector

1-5-2. Removing and Mounting the Side Cover

Preparation: Phillips head screwdriver (No.2) and cover key (attached goods)
1
Remove the filter cover (side).
The filter cover is held in place by plastic clips (4 locations). Grasp the top and bottom edges of the cover and pull it
towards you to remove it.
Clip receptacle holes
2
Loosen the four fixing screws on the side cover.
Loosen four screws on the side cover until they are free to spin. The screws do not detach from the cover.
LAN
REMOTE RS-232
USB
PWR
3
Unlock the side cover.
Unlock the cover using the cover key.
LAN
REMOTE RS-232
USB
PWR
28
Clip receptacle holes
3D GP I/O
3D GP I/O