5.
Place the SATA/SAS storage device
into the storage device tray then secure
it with four screws.
6.
Insert the storage device tray and
storage device assembly all the way into
the depth of the bay until just a small
fraction of the tray edge protrudes.
When installed, the SATA/SAS connector on the storage device connects to the SATA/SAS
interface on the backplane.
7.
Push the tray lever until it clicks and
secures the storage device tray in
place.
The storage device tray is correctly
placed when its front edge aligns with
the bay edge.
8.
Repeat steps 1 to 7 to install the other
SATA/SAS storage devices.
ASUS RS700A-E9 Series
2-11