Removing Screws From The Switch - Cisco Catalyst 3750 Hardware Installation Manual

Installing the Switch
Note

Removing Screws from the Switch

Figure 3-10 Removing Screws from the Catalyst 3750-24TS, 3750G-24T, 3750-24PS, 3750-48PS,
3750G-16TD, and 3750-48TS Switches
16
17
18
19 20
21 22 C a ta ly st
23 24
23 X
1
24 X
Catalyst 3750 Switch Hardware Installation Guide
3-20
Installing the switch in a 24-inch rack requires an optional bracket kit not included
with the switch. You can order a kit containing the 24-inch rack-mounting
brackets and hardware from Cisco. For the Catalyst 3750G-24TS switches, order
part number RCKMNT-3550-1.5RU=. For the Catalyst 3750-24TS, 3750G-24T,
3750G-12S, and 3750-48TS switches, order part number RCKMNT-1RU=.
If you plan to install the switch in a rack, you must first remove screws in the
switch chassis so that mounting brackets can be attached.
Figure 3-11 show how to remove the chassis screws in a one-rack-unit (RU)
switch.
3 7 5 0
SE RI ES
2
Chapter 3 Switch Installation
Figure 3-10 and
78-15136-03