Page 1
¨ Model No. PFHS60070 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there...
Note: A PART LIST and an EXPLODED DRAWING are attached to the center of this manual. Remove the PART LIST and EXPLODED DRAWING before beginning assembly. PROFORM ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of pur- chase.
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the following important precautions before using the RESTORATION 600. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the RESTORATION 600 are adequately informed of all precautions.
20. Keep all electrical appliances such as radios, telephones, televisions, and lights at least five feet (1.52 meters) away from the water. 21. A wire connector is provided on the pump motor of this unit to connect a minimum No. 8 AWG (804 mm ) solid copper conductor between this unit and any metal equipment,...
WARNING LABEL IDENTIFICATION The warning labels shown below have been placed on the spa cover, printed inside the inflatable spa liner, and placed on the side of the spa jet unit of the RESTORATION 600. Locate the labels and familiar- ize yourself with this information.
Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is PFHS60070. The serial number can be found on a decal attached to spa jet unit (see the front cover of this manual).
CHOOSING A LOCATION FOR THE RESTORATION 600 There are many factors to consider when choosing a location to set up the RESTORATION 600. These factors vary depending on whether you use the RESTORATION 600 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RESTORATION 600.
ASSEMBLY Before beginning assembly, carefully read the following information and instructions: ¥ Assembly requires two people. ¥ Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. 1.
Page 9
4. Before you fill the RESTORATION 600, be sure that it is in the position you want, and that it can be eas- ily serviced, if needed. Once the RESTORATION 600 is filled with water, it will need to be drained to be moved.
USING THE RESTORATION 600 The RESTORATION 600 is designed for up to four adults. The six water jets can be regulated to provide a relaxing massage to sooth away stress, and the strength of the water massage can be adjusted by the air control.
Page 11
and 1/3 of the ÒNon-chlorine ShoxÓ bottle to the water in the spa. Allow the water to circulate for five min- utes. You should now test the pH level of the water. Use the included test strips to check the pH of the water.
Page 12
SPA JET UNIT OPERATION The spa jet unit features three hydro-therapy jets, a whirlpool jet, a suction vent, and a filter housing. The three hydro-therapy jets (A), located on the front of the spa jet unit, focus the water massage on your neck and back.
MAINTENANCE CLEANING THE INFLATABLE SPA LINER The liner should be cleaned with a mild soap solution. Do not use solvents. The liner should always be clean and dry before being moved or stored. CHECKING AND CLEANING THE FILTER The filter should be checked periodically for build-up of dirt and oil.
TROUBLE - SHOOTING Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1.
Page 15
b. This problem is caused by excess air in the pump circulation system. Check to see if the primer cap is fully tightened. Prime the pump again and fully tighten the primer cap (see PRIMING THE SPA JET UNIT on page 10). 10.
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: 1. The MODEL NUMBER of the product (PFHS60070). 2. The NAME of the product (PROFORM ¨...
Page 17
PART LISTÑModel No. PFHS60070 Key No. Qty. Description Power Cord Grommet Motor Cap Screw Dual Temperature Probe Inflatable Cover Clamp Screw Clamp Bolt Fabric Spa Surround Inflatable Spa Liner Spa Jet Nozzle Spa Cover Heater O-ring Spa Jet Unit Heater Housing...