Acuralink - Acura NSX 2018 Owner's Manual

Table of Contents

Advertisement

INSTRUMENT PANEL
TABLE OF
CONTENTS
Condition Indicators
These indicators may require you to perform an action.
Parking brake
VISUAL INDEX
U.S.
If the indicator blinks, there is a problem with the electric parking brake.
Canada
Parking brake system
SAFETY
INFORMATION
Avoid using the parking brake. Have your vehicle checked by an authorized Acura
NSX dealer immediately.
Seat belt reminder
INSTRUMENT
Make sure seat belts are fastened for you and any passenger. The indicator blinks and
PANEL
beeps sound continuously if you or your passenger has not fastened your seat belts
when you begin driving. If the indicator remains on after seat belts are fastened, see
an authorized Acura NSX dealer.
VEHICLE
CONTROLS
Low fuel
Refuel as soon as possible. If the indicator blinks, there is a problem with the fuel
gauge. See an authorized Acura NSX dealer.
AUDIO AND
CONNECTIVITY
Low tire pressure
Stop in a safe place, check tire pressures, and inflate tire(s) if necessary.
Active Damper System
BLUETOOTH®
There is a problem with the Active Damper System.
HANDSFREELINK®
ACURALINK®
44 |
System message
When a condition or malfunction indicator comes on, a message also appears on the
driver information interface. Check the display for more information.
Immobilizer
Your remote transmitter cannot be recognized by the vehicle. If the indicator blinks,
you may not be able to start the engine. Turn the vehicle off and then on again. If it
continues to blink, there may be a problem with the system. See an authorized Acura
NSX dealer.
U.S.
Brake Wear Indicator*
Brake pads may need to be replaced. Avoid high speeds and sudden braking. Have
your vehicle checked by an authorized Acura NSX dealer.
Canada
Ready Indicator
The vehicle is ready to drive.
Immobilizer/security system
Your key or remote transmitter cannot be recognized by the vehicle. If the indicator
blinks, you may not be able to start the engine. Turn the power system off, press and
hold the brake pedal, and restart the vehicle. If it continues to blink, there may be a
problem with the system. See your dealer.
Canadian models: To reset the immobilizer system, follow the steps above after the
battery has been disconnected and then reconnected.
INSTRUMENT PANEL
NAVIGATION
DRIVING
HANDLING THE
UNEXPECTED
MAINTENANCE
SPECIFICATIONS
CLIENT
INFORMATION
VOICE
COMMAND
INDEX
*if equipped
INDEX
| 45

Advertisement

Table of Contents
loading

Table of Contents