Table of Contents
Advertisement
SAFETY
TABLE OF
CONTENTS
Installing a Child Seat
n
A child seat can be installed with a lap/shoulder belt, if absolutely necessary, in the front
passenger seat.
VISUAL INDEX
1. Move the passenger seat to the rearmost position.
2. Place the child seat on the passenger seat.
SAFETY
INFORMATION
INSTRUMENT
PANEL
3. Route the seat belt through the child seat according to
the seat manufacturer's instructions, and insert the latch
plate into the buckle. Insert the latch plate fully until it
VEHICLE
clicks.
CONTROLS
4. Slowly pull the shoulder part of the belt all the way out
until it stops. This activates the lockable retractor.
5. Let the seat belt completely wind up into the retractor,
AUDIO AND
CONNECTIVITY
then try to pull it out to make sure the retractor is locked.
If you are able to pull the shoulder belt out, the lockable
retractor is not activated. Pull the seat belt all the way
out, and repeat steps 3–5.
BLUETOOTH®
HANDSFREELINK®
ACURALINK®
34 |
6. Grab the shoulder part of the seat belt near the buckle
and pull up to remove any slack from the lap part of the
belt. When doing this, place your weight on the child seat
and push it into the vehicle seat.
7. Make sure the child seat is firmly secured by rocking it
forward and back and side to side; less than one inch of
movement should occur near the seat belt.
To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all
the way.
SAFETY
NAVIGATION
DRIVING
HANDLING THE
UNEXPECTED
MAINTENANCE
SPECIFICATIONS
CLIENT
INFORMATION
VOICE
COMMAND
INDEX
INDEX
| 35
Advertisement
Table of Contents
