Omron NJ501-1300 User Manual page 281

Subtree name
ipRouteMetric1
ipRouteMetric2
ipRouteMetric3
ipRouteMetric4
ipRouteNext
Hop
ipRouteType
ipRouteProto
ipRouteAge
NJ-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Standard [(identifier) attribute]
(3) RW
The primary routing metric for this route. This
value is determined based on the protocol speci-
fied in ipRouteProto. Set to −1 if you do not want
to use this metric (this is also the same for ipRo-
uteMetric 2 through 4).
(4) RW
The alternative routing metric for this route.
(5) RW
The alternative routing metric for this route.
(6) RW
The alternative routing metric for this route.
(7) RW
The IP address of the next hop in this route (for
routes connected by a broadcast or media, this is
the agent address or address of that interface).
(8) RW
The type of route.
Other (1): Not any of the following types.
Invalid (2): An invalid route.
Direct (3): A direct connection.
Indirect (4): An indirect connection (not con-
nected to LOCAL).
(9) RO
This is the routing mechanism used to determine
routes. Some values correspond to gateway rout-
ing protocols, but be aware that the host may not
support those protocols.
Other (1): Other than the following items.
Local (2): A route set on the local machine.
Netmgmt (3): A route set by network manage-
ment.
Icmp (4): A route set by an ICMP redirect or
some other ICMP function.
Egp (5): EGP
The following are gateway protocols:
Ggp (6): GGP
Hello (7): HELLO
Rip (8): RIP
is-is (9)
es-is (10)
ciscolgrp (11)
bbnSpflgp (12)
ospf (13): OSPF
bgp (14)
(10) RW
The elapsed time since this route was updated (in
seconds).
12 SNMP Agent
Sup- Implementation
port specifications
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
12-11
12