Assembly - Pro-Form PFEX20020 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
driver .
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-attached.
M8 Nylon
Locknut (10)–4
M4 x 16mm
Screw (32)–5
1. Identify the Front Stabilizer (2). While another person
lifts the front of the Frame (1) slightly, attach the Front
Stabilizer to the Frame with two M10 x 75mm Carriage
Bolts (33) and two M10 Black Nylon Locknuts (34).
M10 Black Nylon M8 Black Split
Locknut (34)–6 Washer (42)–7
M10 x 42mm Button
Bolt (6)–2
M10 Split
Washer (46)–2
M10 x 75mm Carriage Bolt (33)–4
1
33
2
4
and Phillips screw-
M8 x 25mm Button
Screw (47)–3
1
34