Sharing Your Mobile Data Connection - Sony Xperia L2 H3311 User Manual

• Push button method – simply push a button on a WPS-supported device, for
example, a router.
• PIN method – your device creates a random PIN, which you enter on the WPS-
supported device.
To connect to a Wi-Fi network using a WPS button
1 Find and tap Settings > Wi-Fi.
2 Turn on Wi-Fi if it is not already on.
3 Tap , then tap More features > WPS Push Button, then press the WPS
button on the WPS-supported device.
To connect to a Wi-Fi network using a WPS PIN
1 Find and tap Settings > Wi-Fi.
2 Turn on Wi-Fi if it is not already on.
3 Tap , then tap More features > WPS PIN Entry.
4 On the WPS-supported device, enter the PIN that appears on your device.

Sharing your mobile data connection

You can share your mobile data connection with other devices in several ways.
• USB tethering: share your mobile data connection with a single computer using a
USB cable.
• Portable hotspot: share your mobile data connection with up to 10 other devices
simultaneously, including devices that support WPS technology.
• One-touch portable hotspot: touch devices to start sharing your mobile
connection over Wi-Fi.
• Bluetooth tethering: share your mobile data connection with up to four other
devices via Bluetooth.
To share your data connection using a USB cable
1 Connect your device to a computer, using the USB cable that came with it.
2 Find and tap Settings > More > Tethering & portable hotspot.
3 Tap the USB tethering slider, then tap OK if prompted.
status bar once you are connected.
4 To stop sharing your data connection, tap the USB tethering slider or
disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
To share your mobile connection by One-touch portable hotspot
1 Make sure that both devices have the NFC function turned on, and that both
screens are active.
2 Find and tap Settings >More > Tethering & portable hotspot.
3 Tap One-touch portable hotspot > OK. Hold the devices together so that
the NFC detection areas of each device touch, then tap CONNECT.
This function only works with devices that also support NFC Wi-Fi tethering.
This is an internet version of this publication. © Print only for private use.
is displayed in the
49