Description Of Components - Sullair 3000P User Manual

3000P-4500 USER MANUAL
1. Moisture Separator
2. Fluid Filter
3. Separator/Sump Tank
4. Fluid Fill
5. Fluid Fill Sight Glass
6. Starter Box
7. WS Controller
Figure 2-2: Overall Component Layout, Water-Cooled Model
2.2 DESCRIPTION OF
COMPONENTS
Refer to Figure 2-1 and Figure 2-2. The components
and assemblies of the air compressor are clearly
shown. The complete package includes compressor,
electric motor, starter, compressor inlet system,
compressor discharge
lubrication and cooling system, capacity control
system, WS Controller, aftercooler, a combination
separator and trap, all mounted on a heavy gauge
steel frame.
On air-cooled models, a fan draws air into the
enclosure over the fan and main motors through the
12
system, compressor
8. E-Stop Button
9. Compressor Unit
10. Oil Cooler
11. Aftercooler
12. Motor
13. Air Inlet Filter
14. Canopy Vent Fan
combined aftercooler and fluid cooler thereby
removing the compression
compressed air and the cooling fluid, and forces it
out the top of the machine.
On water-cooled models, a shell and tube heat
exchanger is mounted on the compressor frame.
Fluid is piped into the heat exchanger where
compression heat is removed from the fluid. Another
similar heat exchanger cools the compressed air.
Both air-cooled and water-cooled versions have
easily accessible items such as the fluid filter air/oil
separator and control valves. The inlet air filter is also
easily accessible for servicing.
SECTION 2
heat from the