Replacing The Power And Volume-Buttons Board - Dell Inspiron 13 5000 Service Manual

Replacing the power and volume-
buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1 Align the screw hole on the power and volume-buttons board with the screw
hole on the palm-rest assembly.
2 Replace the screw (M2x3.5) that secures the power and volume-buttons board
to the palm-rest assembly.
3 Route the power and volume-buttons board-cable through the routing guides on
the palm-rest assembly.
4 Connect the power and volume-buttons board-cable to the I/O board.
5 Adhere the tape that secure the power and volume-buttons board-cable to the
palm-rest assembly.
Post-requisites
1 Replace the hard
2 Replace the battery.
3 Replace the base
computer. After working inside your computer, follow
After working inside your
drive.
cover.
computer. For more safety best
www.dell.com/
Before
51