JVC KW-XC406 Instructions Manual page 28

Symptoms
• Tracks do not play back in the order
you have intended them to play.
• Elapsed playing time is not correct.
• "NO FILES" appears on the display.
• Correct characters are not displayed
(e.g. album name).
• A cassette cannot be inserted.
• Cassette can be neither played back nor
ejected.
• "NO TAPE" appears on the display.
• Cassette tapes become hot.
• Tape sound is at very low level and
sound quality is degraded.
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on
the display.
• The CD changer does not work at all.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
28
Remedies/Causes
Playback order is determined when the files are
recorded.
This sometimes occurs during play. This is caused
by how the tracks are recorded on the disc.
Insert a disc that contains MP3/WMA tracks.
This unit can only display alphabets (upper/lower
case), numbers, and a limited number of symbols.
Insert the cassette with the exposed tape facing
right.
Unlock the cassette (see page 17).
Insert a cassette correctly.
This is not a malfunction.
Clean the tape head using a head cleaning tape.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
Press the reset button of the CD changer.
Reset the unit (see page 2).