Registering Id Codes - Furuno FS-5075 Operator's Manual

8. NBDP PREPARATIONS
8.1.2

Registering ID codes

1. Press the function key F5 and then the 6, 7, 8 or 9 key to enter the Group ID Code (4 or
5 digits), Group ID Code (9 digits), Select ID Code (4 or 5 digits) or Select ID Code (9
digits), respectively.
2. Enter Group ID or Select ID as appropriate and then press the Enter key. A prompt asks
you to verify data.
3. If the ID is correct, press the Enter key.
For final verification of the data, the Caution shown in the illustration below appears.
Select ID Code (4/5)
12345
Caution
Confirm the 'CODE' before pressing ENTER key.
You cannot change the CODE once it has been entered.
4. If the ID is correct, press the Enter key again.
8-2
Select ID Entry
Select ID Code (4/5)
_
ID code entry screen
Select ID Entry
O
Cancel
Message for confirmation of code entered
K