Console Mode Commands - Fortinet FortiWAN Administration Manual

Web UI Overview
H323 (1720)
l
RADIUS (1812)
l
RADIUS-ACCT (1813)
l
pcAnywhere-D (5631)
l
pcAnywhere-S (5632)
l
X-Windows (6000-6063)
l
GRE
l
ESP
l
AH
l
ICMP
l
TCP@
l
UDP@
l
Protocol#
l
Any
l

Console Mode Commands

This section provides further details on the Console mode commands. Before logging onto serial console via
HyperTerminal, please ensure the following settings are in place: Bits per second: 9600; Data bits: 8; Parity: None;
Stop bits: 1; Flow control: None.
help: Displays the help menu
help [COMMAND]
Show a list of console commands.
arping: Find the corresponding MAC address of an IP address
arping [HOST] [LINK] [INDEX]
Show the MAC address of an IP address. Host is the IP of the machine or domain name whose MAC address is of
interest. Link is the type of interface used, i.e. WAN, LAN and DMZ. If WAN is selected, please indicate the WAN port
number.
Example: "arping 192.168.2.100 lan" [enter] will send out an ARP packet from LAN port to query the MAC address of
the machine whose IP address is 192.168.2.100.
Note: If domain name is to be used in the HOST parameter, the DNS Server must be set in the Web UI [System]->
[Network Settings]->[DNS Server].
For more on ARP related error messages, please refer to other ARP materials.
disablefw: Disable firewall
disablefw
System will re-confirm, press [y] to proceed or [n] to cancel.
FortiWAN Handbook
Fortinet Technologies Inc.
How to set up your FortiWAN
28