Turning The Printer On - Samsung CLP-500 Setup Manual

Turning the Printer On

Step 6.
24
S G
ETUP UIDE
Using a network antenna
1
If you install the wired/wireless network card, you can use
your printer in wireless environment.
For details about installing the wired/wireless network card,
see the User's Guide of your printer in the CD-ROM.
N : After connecting the printer you need to configure the
OTE
network parameters on the control panel. See the User's Guide of
your printer. You can use the software supplied with the card.
Refer to the software User's Guide.
1
Plug the power cord into the power receptacle on the back
of the printer.
2
Plug the other end into a properly grounded AC outlet and
turn on the power.
C
:
AUTIONS
• Some parts inside of the printer may be hot when powered. Be
careful not to be burned when accessing inside the printer.
• Do not disassemble the printer when it is powered. Doing so may
give you an electric shock.
1
2