Toro 20372 Operator's Manual page 19

Figure 23
1. Handle knob (2)
3. Fold the handle by rotating it forward
Figure 24
1. Operating position
4. Insert the carriage bolt (with the bolt head toward
the inside) through the handle bracket and the
upper hole in the handle end. Ensure that the
square edges of each carriage bolt fits into the
upper or lower square hole in its related handle
bracket (Figure 25).
g032869
2. Carriage bolt (2)
(Figure 24).
g032870
2. Folded position
1. Handle knob (2)
5. Loosely install the handle knobs and carriage
bolts on the handle brackets.
6. To unfold the handle, refer to
Unfolding the Handle (page
19
Figure 25
2. Carriage bolt (2)
1 Assembling and
6).
g032865