Additional References
Updating the Hardware Clock: Example
The following example shows an NTP configuration in which the router is configured to update its hardware
clock from the software clock at periodic intervals:
ntp
server 10.3.32.154
update-calendar
Additional References
The following sections provide references related to implementing NTP on Cisco IOS XR software.
Related Documents
Related Topic
Cisco IOS XR clock commands
Cisco IOS XR NTP commands
Information about getting started with Cisco IOS XR
Software
Cisco IOS XR master command index
Information about user groups and task IDs
Standards
Standards
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.
System Management Configuration Guide for the Cisco NCS 6000 Series Router, Release 5.0.x
46
Document Title
Clock Commands on module of System
Management Command Reference for Cisco NCS
6000 Series Routers
NTP Commands on module of System Management
Command Reference for Cisco NCS 6000 Series
Routers
Configuring AAA Services on module of System
Security Configuration Guide for Cisco NCS 6000
Series Routers
Title
—
Implementing NTP