Electrical Diagram (110 - 230Vac, 24Vdc) - QUBINO ZMNHDD2 User Manuals

9. Electrical Diagram (110 - 230VAC, 24VDC)

N Neutral wire (+VDC)
L Live (line) wire (-VDC)
Output for electrical device
I3 Input for switch/push button or sensor
I2 Input for switch/push button or sensor
I1 Input for push button/switch
TS Terminal for digital temperature sensor (only for Flush Dimmer device compatible digital
temperature sensor, which must be ordered separately)
S Service button
WARNING:
The S (Service) button must NOT be used when the device is connected to a 110-230V power
supply.
NOTE: When overload is detected, the device automatically switches off. If this happens, check
if the load matches device specifications and if connections are according to the diagram. To
restore the dimmer to regular operation, please power cycle the device.
Notes for diagram:
43
EN.