Displaying The Ssh Configuration And Status - Cisco Catalyst 3550 series Software Configuration Manual

Chapter 8 Configuring Switch-Based Authentication
Command
Step 5 show ip ssh
or
show ssh
Step 6 copy running-config startup-config
To return to the default SSH control parameters, use the no ip ssh {timeout | authentication-retries}
global configuration command.

Displaying the SSH Configuration and Status

To display the SSH server configuration and status, use one or more of the privileged EXEC commands
in Table
Table 8-3
Command
show ip ssh
show ssh
For more information about these commands, refer to the "Secure Shell Commands" section in the
"Other Security Features" chapter of the Cisco IOS Security Command Reference, Cisco IOS
Release 12.2, at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_r/fothercr/
srfssh.htm.
78-11194-09
Purpose
Display the version and configuration information for your SSH server.
Display the status of the SSH server connections on the switch.
(Optional) Save your entries in the configuration file.
8-3:
Commands for Displaying the SSH Server Configuration and Status
Purpose
Shows the version and configuration information for the SSH server.
Shows the status of the SSH server.
Catalyst 3550 Multilayer Switch Software Configuration Guide
Configuring the Switch for Secure Shell
8-41