Lenovo ThinkPad P71 User Manual page 79

Descriptions: Enter Intel Rapid Storage Technology Configuration Utility to manage RAID volumes on the
Intel RAID Controller.
CPU
• Core Multi-Processing
Values: Disabled, Enabled
Descriptions: Select Enable to allow additional execution core units within a microprocessor. Select
Disable to allow only one execution core unit within a microprocessor.
• Intel (R) Hyper-Threading Technology
Values: Disabled, Enabled
Descriptions: Enable: This selection enables additional microprocessor threads. These threads appear as
additional processors but share some resources with the other threads within a microprocessor. Disable:
This selection enables only one thread within each execution core unit.
Thunderbolt(TM) 3
• Wake by Thunderbolt(TM) 3
Values: Disabled, Enabled
Descriptions: Enable or disable Wake Feature with Thunderbolt 3 Port. If you select Enabled, the battery
life during the low power status might become shorter.
• Security level
Values: No Security, User Authorization, Secure Connect, Display Port and USB
Descriptions: Select the security level:
– No Security: Allow Thunderbolt devices to be connected automatically
– User Authorization: Allow Thunderbolt devices to be connected after the user authorization
– Secure Connect: Allow Thunderbolt devices to be connected with a saved key that has been
approved by the user.
– Display Port and USB: Allow only DisplayPort compatible devices and USB devices to be connected.
Thunderbolt devices are not allowed to be connected.
• Support in Pre Boot Environment:
– Thunderbolt(TM) device
Values: Disabled, Enabled
Descriptions: Enable or disable pre-OS support for Thunderbolt devices attached to the Thunderbolt 3
port. To use a device in the pre-boot environment, authorize it in the operating system or set the
Security level to No Security. To boot from a device, configure it by selecting Startup ➙ Boot.
– USB device
Values: Disabled, Enabled
Descriptions: Enable or disable pre-OS support for USB devices attached to the Thunderbolt 3 port. To
boot from a device, configure it by selecting Startup ➙ Boot.
Intel AMT
• Intel (R) AMT Control
Values: Disabled, Enabled, Permanently Disabled
Descriptions: If you select Enabled, Intel AMT (Active Management Technology) is configured and
additional setup items are provided in MEBx (Management Engine BIOS Extension) Setup. If you select
Permanently Disabled, you can never enable it again. Be cautious when you make the selection.
.
Chapter 6 Advanced configuration
61