Wiring Connections - Jensen JDM118BT Installation And User Manual

INSTALLATION(CONT.)

Wiring Connections

WIRING
DIAGRAM
Radio Antenna Socket
Front Left CH RCA Output (white)
Front Right CH RCA Output (red)
Rear Right CH RCA Output (red)
Rear Left CH RCA Output (white)
CAUTION
+12V DC
NEGATIVE
GROUND
- Only use speakers with 4 ohms impedance.
- Do not attach the control panel to the chassis before wiring is complete.
- The maximum current of the auto antenna is 200mA.
Removal of the Main Unit
1. Remove the plastic trim out from the main unit.
2. Insert a bracket key into the left and right side of the main unit and draw the unit out of
the mounting sleeve.
GND/ground (Black)
Power/battery (Yellow)
ACC/ignition (Red)
ANT/aerial (BLUE)
FUSE 10A
10A
Purple
Rear Right
Purple/Black
Gray
Front Right
Gray/Black
White
Front Left
White/Black
Green
Rear Left
Green/Black
Speaker
Speaker
Speaker
Speaker
3