Seat Ventilators - Lexus RC200T 2016 Owner's Manual

Seat Heaters (if equipped)/
Seat Ventilators (if equipped)
■
Seat heaters
Type A
■

Seat ventilators

■ Seat heater timer control
To enable seat heater timer control, press and hold the driver and front passenger seat
heater switches at the same time when the vehicle is stopped until a buzzer sounds once. If
a seat heater is turned on while seat heater timer control is enabled, the intensity of the seat
heater will automatically change from HiMidLo.
The timing of the change in seat heater intensity differs depending on the temperature
inside the cabin, etc. when the seat heater is operating.
To disable seat heater timer control, press and hold the driver and front passenger seat
heater switches at the same time until a buzzer sounds twice.
65
Each time the switch is pressed, the inten-
Type B
sity of the seat heater changes and the level
indicator lights (amber) light as follows: 
Hi (3 segments lit)  Mid (2 segments lit)
 Lo (1 segment lit)  Off
Each time the switch is pressed, the inten-
sity of the seat ventilator changes and the
level indicator lights (green) light as follows: 
Hi (3 segments lit)  Mid (2 segments lit)
 Lo (1 segment lit)  Off