Lexus RC200T 2016 Owner's Manual page 26

■ Adjusting the set speed
■
Changing the vehicle-to-vehicle distance (vehicle-to-vehicle distance con-
trol mode)
Preceding
vehicle mark
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.
Increases the speed
1
Decreases the speed
2
Fine adjustment: Momentarily move the
lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
Pressing the button changes the vehicle-to-
vehicle distance as follows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the
preceding vehicle mark will also be dis-
played.
26