Detailed information on the traffic problem is
linked to the symbol, and to the extent that
information is available the following is also
displayed:
•
duration
•
restrictions on speed, vehicle width and
height
•
roads affected.
If there are several traffic problems in the
crosshair frame, then the problem closest to
the centre of the crosshair is shown first after
a pressing OK once.
The upper section of the display screen can
show e.g. "
2/5
" which means that the current
information is number 2 of a total of 5 mes-
sages in the crosshair - the remaining mes-
sages can be scrolled to using short presses
on OK.
•
Return to map display with EXIT.
To avoid traffic problems
Traffic problems ahead
(Traffic events ahead)
Menu bar 2 without itinerary added.
Press OK on
Traffic events ahead
events ahead) to list the current traffic prob-
lems.
Traffic problems along the route
(Traffic events along route)
Menu bar 2 with itinerary added.
This is the same menu bar as in the previous
section, but with an activated itinerary - the
04 Traffic information
Reading information
menu bar now instead reads
along route
(Traffic events along route). Here
the system can be made to guide past the traf-
fic disruption using a different route.
Press OK on the selected menu bar to list the
traffic problems along the route:
(Traffic
List with 1 disruption on the itinerary's route.
The driver can avoid traffic problems by allow-
ing the system to determine a different route.
Proceed as follows:
1. Select/highlight the traffic obstacle to be
avoided + OK - the option is ticked.
2. If several obstacles need to be avoided -
tick these too. A maximum of 15 can be
selected.
3. Then select
Calculate new route
(Calculate new route) + OK.
The system then calculates a route that leads
past the ticked traffic disruptions.
Traffic events
04
57