Alarm
The alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
The alarm is triggered in the following situations when the alarm is set:
A locked door is unlocked or opened in any way other than using the entry
●
function (if equipped) or wireless remote control. (The doors will lock again
automatically.)
The hood is opened.
●
Vehicles with the intrusion sensor: The intrusion sensor detects something
●
moving inside the vehicle. (An intruder gets in the vehicle.)
Vehicles with the tilt sensor: The tilt sensor detects a change of vehicle inclina-
●
tion.
Vehicles with the glass breakage sensor: Any of the windows are broken.
●
Setting the alarm system
Close the doors and hood, and lock all
the doors using the entry function (if
equipped) or wireless remote control.
The system will be set automatically
after 30 seconds.
The security indicator changes from
being on to flashing when the system is
set.
Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm.
Unlock the doors using the entry function (if equipped) or wireless remote
●
control.
Start the engine. (The alarm will be deactivated or stopped after a few sec-
●
onds.)
NX200t/200_OM_Europe_OM78156E
1-2. Theft deterrent system
: If equipped
89
1