Stop & Start System Information; Eco Driving Indicator - Lexus NX200 2017 Owner's Manual

Stop & Start system information (if equipped)
Stop & Start Settings
■
P. 266
Idling Stop Time
■
Displays the current idling stop time (Engine stop time due to the Stop & Start
system)
Idling Stop Time (after reset/after start)
■
Displays the total idling stop time (engine stop time via the Stop & Start sys-
tem) after resetting and engine startup.
Idling Stop Time fuel savings (after reset/after start)
■
Displays the fuel savings (reference) during idling stop time after resetting and
engine startup.

Eco Driving Indicator

■
Eco Driving Indicator Light
1
During Eco-friendly acceleration (Eco driv-
ing), the Eco Driving Indicator Light will turn
on. When the acceleration exceeds the Zone
of Eco driving, or when the vehicle is stopped,
the light turns off.
Eco Driving Indicator Zone Display
2
Suggests the Zone of Eco driving with current
Eco driving ratio based on acceleration.
Eco driving ratio based on acceleration
3
If the acceleration exceeds the Zone of Eco
driving, the right side of the Eco Driving Indi-
cator Zone Display will illuminate.
When this happens, the Eco Driving Indicator
Light will turn off.
Zone of Eco driving
4
Eco Driving Indicator will not operate under the following conditions:
The shift lever is in any position other than D.
●
A paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (P. 340)
●
The vehicle speed is approximately 130 km/h (80 mph) or higher.
●
Settings of the display and non-display of the Eco Driving Indicator Light can be
changed.
NX200t/200_OM_Europe_OM78156E
2. Instrument cluster
109
2