Led Indicators - KTI Networks KC-350-C Installation Manual

2.8 LED Indicators

Link Fault Pass Through Function is disabled
LED Display
PWR Power status
TP LINK TP port link status
TP 100M TP port speed status On
TP FDX TP port duplex status On
FX LINK FX port link status
FX OL FX port optical link
Link Fault Pass Through Function is enabled
TP LINK FX LINK
On On
Off Off
Off Off
Status Interpretation
On Power on
Off Power off
On Link up and no traffic
Off Link fault
Blink Rx/Tx activities
100Mbps
Off 10Mbps
Full duplex
Off Half duplex
Blink Collisions on half duplex
On Link up and no traffic
Off Link fault
Blink Rx/Tx activities
On Optical signal is detected
Off No optical signal is detected
FX OL Interpretation
On Both TP and FX ports link up
On (1) TP port link fault or
(2) FX port received FEFI signal (FX port Tx path failed.)
Off (1) TP port link fault or
(2) FX port Rx link failure detected
20