Power - Brookstone BIG BLUESTUDIO User Manual

WI-FI SET UP
1. When the WI-FI STATUS LED INDICATOR is slowly flashing white (indicating
the Big Blue Studio is ready to connect to a Wi-Fi network), open Settings on
your device and access Wi-Fi settings.
2. Select "BB_Studio_(XXX)_Setup" from the list of available networks. Each unit
has a unique identifier in parentheses after "BB Studio".
3. Open Big Blue Audio app and follow instructions on connecting Big Blue to a
local Wi-Fi network.
4. When Big Blue Studio is connected to a local Wi-Fi network, the WI-FI STATUS
LED INDICATOR will slow flash green indicating that the Big Blue Studio
is connected to a network but not streaming audio. The WI-FI MODE LED
INDICATOR is solid white to indicate Big Blue Studio is in Wi-Fi mode.
PLAYING AUDIO WITH WI-FI
1. After Big Blue Studio has been set up on a local Wi-Fi network, select Big Blue
Studio in the Big Blue Audio app, then select a source to stream audio.
2. When audio is streaming, the WI-FI STATUS LED INDICATOR will be solid green.
3. Use VOLUME + on the Big Blue Studio Chrome to increase the volume
4. Use VOLUME - on the Big Blue Studio Chrome to decrease the volume.
USING GOOGLE CAST
1. After Big Blue Studio has been set up on a local Wi-Fi network, tap the Cast
button in downloaded apps that include Google Cast.
2. Audio will stream from the app to Big Blue Studio over Wi-Fi.
10
PAIRING YOUR DEVICE WITH BLUETOOTH
1. Prepare your device to pair using Bluetooth
33 feet of Big Blue Studio. Refer to your device's owner's manual for details if
necessary.
2. Press the POWER/PAIRING BUTTON on the main unit to turn on the Big
Blue Studio until the LED RING illuminates solid and a tone sounds.
3. Press and hold the POWER/PAIRING BUTTON on the main unit until the LED
RING starts pulsing.
4. The Big Blue Studio is in pairing mode when the LED RING and BLUETOOTH
MODE LED INDICATOR are pulsing. Big Blue Studio will wait for a connection
in pairing mode for up to 120 seconds.
5. Once Big Blue Studio is in pairing mode and your device is ready to pair, select
"BB Studio (XXX)". Each unit has a unique identifier in parentheses after "BB
Studio." If prompted, use 0000 as a PIN for the pairing code.
6. O nce "Big Blue Studio" is selected, the LED RING will change to solid to confirm
pairing is complete.
Note: To cancel the pairing mode press the POWER/PAIRING BUTTON to
power the unit off, or wait the 120 seconds for Big Blue Studio to cancel pairing
automatically. The LED RING will return to solid and the unit will remain on.
®
® , making sure you are within
®
11