Related Manuals for Brookstone BIG BLUESTUDIO
Summary of Contents for Brookstone BIG BLUESTUDIO
- Page 1 NEED FINAL NAME AND PHOTO FROM PACKAGE STUDIO BIG BLUE WIRELESS ROOM-FILLING SOUND...
- Page 2 TABLE OF CONTENTS CAUTION Warnings and Cautions............1 • T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
-
Page 3: Safety And Handling Information
WARNING SAFETY AND HANDLING INFORMATION 1. C lose supervision is necessary when this appliance/product is used by or near For maximum product life, do not drop, throw or crush the speaker. Do not expose it children or mentally disabled individuals. to humidity, dust, or operating temperatures outside 32°F to 113°F (0°C to 45°C). 2. U se this unit only for its intended use as described in this manual. SAVE THESE INSTRUCTIONS! 3. Unplug this unit during lightning storms or when unused for long periods of time. DANGER 4. Never drop or insert an object into any opening. To reduce the risk of electric shock, burns, fire or injury: 5. P rotect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit. 1. Do not use while bathing or in a shower. 6. D o not allow cord to touch hot surfaces. Wrap cord loosely around the unit 2. D o not place or store unit where it can fall or be pulled into a tub or sink. when storing. -
Page 4: Fcc Information
unit. Incorrect repair can cause risk of electric shock or injury to persons when the This equipment complies with Part 15 of the FCC Rules. Operation is subject to the unit is used. following two conditions: 13. D o not operate in the presence of explosive and/or flammable fumes. 1. This equipment may not cause harmful interference. 14. N ever remove the plug from the outlet by pulling the power cord. 2. T his equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user’ s authority to FCC INFORMATION operate this device. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement: This equipment has been tested and found to comply with the limits for a Class B This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. -
Page 5: Location Of Parts And Controls
LOCATION OF PARTS AND CONTROLS LOCATION OF PARTS AND CONTROLS Wi-Fi Set Up/Reset Button LED Ring On/Off button Volume - LED Ring Wi-Fi Mode LED Indicator 10. Aux In Port Power/Pairing Button Volume + Wi-Fi Status LED Indicator 11. DC In Port Bluetooth Mode LED Indicator 12. AC Adapter ® STATUS... -
Page 6: Downloading Free App
DOWNLOADING FREE APP POWER 1. Connect the adapter’s jack to the DC IN PORT on the back of Big Blue Studio. Go to the iTunes App Store (for Apple devices) ® 2. Plug the adapter into an electrical outlet. or Google Play (for Android devices) to download 3. To power on, press the POWER BUTTON. The power on tone will sound and the “Big Blue Audio” App. the LED ring will turn on. 4. When the Big Blue Studio is powered on, the WI-FI STATUS LED INDICATOR Big Blue Audio is solid red while the Big Blue Studio is booting up (about 20 seconds). The WI-FI STATUS LED INDICATOR may turn on and off during the booting up process, this is normal. 5. If a network has not been already set up, after booting is complete, the WI-FI STATUS LED INDICATOR will slow flash white indicating the Big Blue is ready to connect to a Wi-Fi network. 6. If a network has already been set up, after booting is complete, the Wi-Fi Status LED will slow flash green indicating that the Big Blue Studio is connected to a network but not streaming audio. 7. To power off, press the power button. The LED ring will turn off. Notes: • Big Blue Studio will go into low power mode immediately if no audio is streaming. -
Page 7: Power
WI-FI SET UP PAIRING YOUR DEVICE WITH BLUETOOTH ® 1. Prepare your device to pair using Bluetooth ® , making sure you are within 1. When the WI-FI STATUS LED INDICATOR is slowly flashing white (indicating 33 feet of Big Blue Studio. Refer to your device’s owner’s manual for details if the Big Blue Studio is ready to connect to a Wi-Fi network), open Settings on necessary. your device and access Wi-Fi settings. 2. Press the POWER/PAIRING BUTTON on the main unit to turn on the Big 2. Select “BB_Studio_(XXX)_Setup” from the list of available networks. Each unit Blue Studio until the LED RING illuminates solid and a tone sounds. has a unique identifier in parentheses after “BB Studio”. 3. Press and hold the POWER/PAIRING BUTTON on the main unit until the LED 3. Open Big Blue Audio app and follow instructions on connecting Big Blue to a RING starts pulsing. local Wi-Fi network. 4. The Big Blue Studio is in pairing mode when the LED RING and BLUETOOTH ® 4. When Big Blue Studio is connected to a local Wi-Fi network, the WI-FI STATUS MODE LED INDICATOR are pulsing. Big Blue Studio will wait for a connection LED INDICATOR will slow flash green indicating that the Big Blue Studio in pairing mode for up to 120 seconds. is connected to a network but not streaming audio. The WI-FI MODE LED INDICATOR is solid white to indicate Big Blue Studio is in Wi-Fi mode. -
Page 8: Playing Audio With Bluetooth
PLAYING AUDIO WITH BLUETOOTH USING AUX IN 1. After Big Blue Studio has been paired to a device, either choose “BB Studio Connect your audio device to the Big Blue Studio with a 3.5mm-to-3.5mm cable (not (XXX)” as the audio location within the selected music library or app, or if the included). Big Blue Studio has been set up on a local Wi-Fi network, choose Bluetooth as 1. P lug one end of the cable into your audio device, just like you would a pair of the source in the Big Blue Audio app. headphones. 2. The BLUETOOTH MODE LED INDICATOR is solid white. 2. Plug the other end of the cable into the 3.5mm port labeled AUX IN on the Big 3. Use VOLUME + on the Big Blue Studio to increase the volume. Blue Studio. 4. Use VOLUME - on the Big Blue Studio to decrease the volume. 3. Use your audio device to control music playback and volume through Big Blue Studio. Note: The AUX IN function takes precedence over the Wi-Fi and Bluetooth ®... -
Page 9: Compatibility
Frequency Response......... . . 80Hz - 20kHz Drivers . -
Page 10: Warranty
ONE (1) YEAR LIMITED WARRANTY but Brookstone, in so far as permitted by law, provides these products “as is.” This warranty does not apply to: a) damage caused by failure to follow instructions Brookstone ® warrants this product against defects in materials and/or workmanship relating to product’s use or the installation of components; b) damage caused by under normal use for a period of ONE (1) YEAR from the date of purchase by the accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage... - Page 11 Find thousands more great ideas online 318421 Merrimack, New Hampshire, USA 03054 • 800-846-3000 • Brookstone.com...