Table of Contents
Advertisement
Connecting to FortiWLM
If the appliance has a redundant power supply, connect each power cable
to a different power source .
IMPORTANT
You can configure FortiWLM for your network through a connection to
command line interface (CLI) .
Connect FortiWLM only to your computer until you finish setup . (If you
place FortiWLM in your network before FortiWLM is set up, traffic could
be interrupted until setup is complete .) Detailed instructions are in the
Network Manager User
Administrator
Switc h
Firewall
Internet
• FortiWLM-1000D is supported ONLY from
FortiWLM 8 .0-SR1 and later .
• SFP support is not available in the 8 .0-SR1
release .
Guide .
5
FortiWL M
FortiWL C
Advertisement
Table of Contents
