Internal & External Displays - Pantech C510 User Manual

4. Internal & External Displays
Your phone has two displays (internal and external). Icons at the top of the
internal display indicate your phone's status.
Internal Display
Internal display icons
Depending on your phone's status, the following icons may appear at the
top of the internal display.
Icon(s) Description
Received signal strength.
The greater the number of bars, the stronger the signal.
A call is being made.
Your phone is outside the network coverage area; you cannot
Icon area
Text and graphic area
Displays the following information in
Standby mode:
Textural and graphical information
showing Network Name, Time and Date,
or a Greeting put in by the user.
Soft keys
make or receive calls.
You have received one or more voice messages.
WAP is connected.
You have received one or more text, multimedia or e-mail
messages.
is displayed if the text message memory is full.
A GPRS signal is available.
is displayed when there is an active GPRS session.
Call-forwarding feature is activated.
Flight mode is activated.
Alarm is set.
You have set the alert type for incoming call to ring only.
You have set the alert type for incoming call to ring ascent
(volume increases over the duration of the ring).
You have set the alert type for incoming call to ring and vibrate.
You have set the alert type for incoming call to vibrate then ring.
You have set the alert type for incoming call to silent.
You have set the alert type for incoming call to vibrate only.
Headset is connected.
Battery level. The bar indicates the available battery charge. If
your battery charge is low, is displayed.
A message is being received.
A message is being sent.
Speakerphone mode is activated.
17